Description
K36 | 36-Piece Punch & Chisel Set in plastic molded case.
K 36 Includes 1 of Each
| MFG # | DESCRIPTION |
| CC 832 | 1/4″ x 4-3/4″ COLD CHISEL |
| CC1232 | 3/8″ x 5-1/4″ COLD CHISEL |
| CC1632 | 1/2″ x 6″ COLD CHISEL |
| CC2432 | 3/4″ x 7″ COLD CHISEL |
| CCL2432 | 3/4″x 12″ LONG COLD CHISEL |
| CD 632 | 3/16″ x 5″ DIAMOND POINT CHISEL |
| CP 832 | 1/4″ x 5-1/2″ CAPE CHISEL |
| CR 832 | 1/4″ x 5-1/2″ ROUND NOSE CHISEL |
| PC 832 | 1/4″ x 4-1/4″ CENTER PUNCH |
| PC1632 | 1/2″ x 6″ CENTER PUNCH |
| PLT 632 | 3/16″ x 9″ LONG TAPER PUNCH |
| PLT 832 | 1/4″ x 11″ LONG TAPER PUNCH |
| PLT1032 | 5/16″ x 11″ LONG TAPER PUNCH |
| PP 232 | 1/16″ x 4-1/4″ PIN PUNCH |
| PP 332 | 3/32″ x 4-3/4″ PIN PUNCH |
| PP 432 | 1/8″ x 5″ PIN PUNCH |
| PP 532 | 5/32″ x 5-1/4″ PIN PUNCH |
| PP 564 | 5/64″ x 4-1/2″ PIN PUNCH |
| PP 632 | 3/16″ x 5-1/2″ PIN PUNCH |
| PP 832 | 1/4″ x 7″ PIN PUNCH |
| PP1232 | 3/8″ x 7″ PIN PUNCH |
| PPL 632 | 3/16″ x 9″ LONG PIN PUNCH |
| PPL1032 | 5/16″ x 9″ LONG PIN PUNCH |
| PR 832 | 1/4″ x 4-1/4″ PRICK PUNCH |
| PS 232 | 1/16″ x 4-1/2″ SOLID PUNCH |
| PS 432 | 1/8″ x 4-1/2″ SOLID PUNCH |
| PS 832 | 1/4″ x 6″ SOLID PUNCH |
| PS1032 | 5/16″ x 7″ SOLID PUNCH |
| RS 232 | 1/16″ x 4-1/2″ ROLL SPRING PUNCH |
| RS 332 | 3/32″ x 5″ ROLL SPRING PUNCH |
| RS 432 | 1/8″ x 5-1/2″ ROLL SPRING PUNCH |
| RS 532 | 5/32″ x 6-1/4″ ROLL SPRING PUNCH |
| RS 564 | 5/64″ x 4-3/4″ ROLL SPRING PUNCH |
| RS 832 | 1/4″ x 7-1/4″ ROLL SPRING PUNCH |
| RS1232 | 3/8″ x 8″ ROLL SPRING PUNCH |
| RS1632 | 1/2″ x 9-1/4″ ROLL SPRING PUNCH |
All Wilde punches and chisels are forged from high-carbon molybdenum tool steel and individually heat-treated to make them the toughest striking tools on the market. Wilde punches and chisels are hardened the entire length with a tempered striking end.
Chisel cutting edges are sharpened and re-sharpened to give the keenest points available. Pin Punches have a reverse taper point which eliminates the punch from sticking in the work-place.
Chisels are designed to be re-sharpened once they become dull. Care should be taken that excessive heat is not obtained when re-sharpening. If the grinding temperature is not controlled, the hardness can be taken out of the immediate area. More importantly, a hard, brittle surface can be set which is very susceptible to fracture.